Today, some terrorist, militianist, gangsta NH folk let their home made forge go critical and burned a hole to China.
The Chinese embassy in Washington lodged a formal complaint and prez. Obama vowed to use executive privilege to register all home forges.
alright
I understand there was slave/child labor used! With the fat cat, capitalist pig dogs keeping 97% of the aluminum production and only giving the workers 3%!
I just want to put it on the record that I was absent from the premises and did not witness anything. ...It's not my fault.
Quote from: eglove on January 05, 2016, 10:38 PM NHFT
I just want to put it on the record that I was absent from the premises and did not witness anything. ...It's not my fault.
See this proves that eglove isn't a libertarian or anarchist. Exploiting the workers is a tenet of the philosophy!
Quote from: Pat K on January 05, 2016, 08:58 PM NHFT
The Chinese embassy in Washington lodged a formal complaint and prez. Obama, with fake Jimmy Swaggart tears streaming down his face, vowed to use executive privilege to register all home forges.
Register and
tax. Don't forget the tax part.
I suspect they were counterfeiting aluminum pennies AND didn't have a fire permit. :o
Foundry, not forge.
Jeez, get it right, steam-boy!
(https://i.imgur.com/PhJomWN.jpg)
How'd you get those pictures of our operation!
ok so now we know the place (eglove) and the final product (jay)
swarm swarm
We can't agree on how much to sell the $10 bills for.
I want $25 each because they're 1964 bills.
of course
So the furnace that is used in the foundry can be used as a forge as well. In fact we were running it using coal and it melted a steel link of chain that Jim had welded to the crucible.
William and I built the furnace out of stuff we had on hand, except the refractory insulation which was made up of furnace cement and perlite.
When running on wood it was running like a rocket with flames shooting out of the hole in the lid. We melted though a thin walled steel container the first time we melted aluminum. The coal was less dramatic, but really hot and we got a lot of heat out of a very small amount.
We had Diamond Jim make us a crucible out of a heavy gauge steel pipe. He plasma cut a piece of plate to weld to the bottom of the pipe and welded on bolts to hang it from.
The boys enjoyed melting the soda cans and Jim showed El Brento how to use the plasma cutter. After cleaning the dross (crap) off the top of the melted aluminum and adding flux we cast the cleaned metal into the iron christmas pan. So the next step will be to make a proper mold and cast something cool from the shiny, hot, liquid metal.
Trying to come up with an idea for a product that could be sold by the homeschool kids. I was thinking drink coasters with a porcupine embossed in the surface. Any other ideas of what might sell?
Pour it in an anthill and call it art.
Quote from: blackie on January 08, 2016, 08:45 AM NHFT
Pour it in an anthill and call it art.
I've seen that. If we had Fire Ants I could feel really good about it. ;D
hmmmm
pretty cool stuff
Quote from: Tom Sawyer on January 08, 2016, 06:43 AM NHFT
Trying to come up with an idea for a product that could be sold by the homeschool kids. I was thinking drink coasters with a porcupine embossed in the surface. Any other ideas of what might sell?
If you're talking rough-cast aluminum, then coasters and trivets sound great.
Quote from: KBCraig on January 08, 2016, 10:08 PM NHFT
Quote from: Tom Sawyer on January 08, 2016, 06:43 AM NHFT
Trying to come up with an idea for a product that could be sold by the homeschool kids. I was thinking drink coasters with a porcupine embossed in the surface. Any other ideas of what might sell?
If you're talking rough-cast aluminum, then coasters and trivets sound great.
Trivets would be good.
Becky mentioned refrigerator magnets would be something people would like.
If it's at all possible I'd like an aluminum foil hat. :)
Quote from: Free libertarian on January 09, 2016, 03:23 PM NHFT
If it's at all possible I'd like an aluminum foil hat. :)
When William was little (he is getting really tall) Becky and I came back to pick him up at Jim and Lauren's after an evening out. It was almost midnight and not only was the boy still up, but he was helping wrap Jim's head up in a aluminum foil swami's turban. ;D
So yes we have the capability of custom made tin foil hats!
Quote from: Tom Sawyer on January 09, 2016, 12:07 PM NHFT
Quote from: KBCraig on January 08, 2016, 10:08 PM NHFT
Quote from: Tom Sawyer on January 08, 2016, 06:43 AM NHFT
Trying to come up with an idea for a product that could be sold by the homeschool kids. I was thinking drink coasters with a porcupine embossed in the surface. Any other ideas of what might sell?
If you're talking rough-cast aluminum, then coasters and trivets sound great.
Trivets would be good.
Becky mentioned refrigerator magnets would be something people would like.
Sure. You can epoxy magnets to the back, or leave room to screw on some cupped supermagnets.
http://www.leevalley.com/US/wood/page.aspx?p=60007&cat=1,42363,42348
magnets sounds good since you could do most any shape on the front
I might need some backup tinfoil hats. I don't know what has happened to my Don Quixote hat. I might need a tinfoil one if I make it to Liberty Forum, Porcfest, or Keenevention.